ESS3016X User’s Manual
26
Figure 3-17
3.3.1.3
Remove binding
If you want to remove the network card binding, please click the remove binding button in Figure
3-15. Now you can see an interface is shown as in Figure 3-18.
These two cards are displayed respectively. The independent network card etho information is
the same as previous binding information.
If you want to view network card detailed information, please click status button. The interface is
similar to Figure 3-17.
If you want to configure the network card, please click corresponding edit button. The interface is
similar to Figure 3-16.
Figure 3-18
3.3.1.4
Binding the network card
Click the Up binding button in Figure 3-18, you can go to the following interface. See Figure 3-19.
Please select two network cards first and then input IP address, subnet mask and default
gateway. Click OK button you can complete the binding setup.
