ESS3016X User’s Manual
71
After hot swap disks, RAID5 device from working status to clean, degraded status. Current
RAID5 disk group can still work properly.
Figure 8-5
6). Hot swap disk
In web configuration interface, from disk configuration to disk configuration, you can see the disk
status. Disk3 corresponding channel number is channel 3(Please refer to Figure 8-4), now you
can remove the corresponding disk from the rack.
7). In web configuration interface, from disk configuration to disk configuration, you can see the
RAID status information. See Figure 8-6.
Figure 8-6
8).from disk to RAID, you can view the RAID device status after hot swap. See Figure 8-7.
The RAID status after hot swap is the same with that before hot swap.
Figure 8-7
Now you can refer to the following part for inserting a new disk.
Hot insert disk example.
Note: The hot insert operation only applies to the disk group that has been hot swapped.
It is to guarantee data safety.
1). In web configuration interface, from disk configuration to disk configuration, you can see the
following information. See Figure 8-8.
