ESS3016X User’s Manual
84
Figure 11-2
Here we take netshowas an example.
In debug command line, input netshow and then click Enter button.
Now you can see an interface is shown as in Figure 11-3.
You can see the information after
bond0.
In Figure 11-3, you can see system IP address is
10.6.5.81.
Note:
Netset is to reset system IP address and it has two command parameters: parameter 1 is to set
the IP address and parameter 2 is subnet mask. Since there is no default gateway, you need to
log in web and then set system default gateway after setting IP address.
