Dahua DHI-ARC3008C, Installer Manual

Page: 13 / 111

Alarm Control Panel Installer Manual
12
No. Name Function
should receive ground connection.
G Ground.
11 TIP_O, RING_O Telephone connection port
12 TIP_IN, RING_IN Telephone line port
13 OUT_1 indicator
ON: OUT_1 is open
OFF: OUT_1 is closed
14 OUT_2 indicator
ON: OUT_2 is open
OFF: OUT_2 is closed
15 BUS2_TX indicator
Data transmitting indicator of the second group of RS-485 ports.
ON: Transmitting is in process.
16 BUS2_RX indicator
Data receiving indicator of the second group of RS-485 ports.
ON: Date receiving is in process.
17 BUS1_TX indicator
Data transmitting indicator of the first group of RS-485 ports.
ON: Transmitting is in process.
18 BUS1_RX indicator
Data receiving indicator of the first group of RS-485 ports.
ON: Date receiving is in process.
19 A2, B2 Connects to RS-485 expansion module.
20
+12V
Auxiliary power output 12V DC supplies power to the external
devices such as detectors.
G Ground.
21 A1, B1 RS-485 port that connects to Keypad (maximum 8 Keypads).
22
DC_IN Receives 14.5V DC power supply.
G Ground.
23 Case tamper port The alarm is activated when the case is opened.
24 Wall tamper port The alarm is activated when the case is detached from the wall.
25 2G module Connects to 2G module.
26 Discharge indicator ON: Battery is charging
27 Low power indicator
ON: Battery low power.
If power supplies normally, the indicator will not be ON in case of
low battery.
28 PSTN Connects to PSTN module.
29 4G module Connects to 4G module.
30 Power indicator ON: Power supply is in normal status.
1.5.3 DIP Switch
There are eight DIP switches on the Control Panel with different functions.