Dahua 8-HDD Series Quick Start Manual Download Page 17

Page: 17 / 86

Turning on the Device 10

Turning on the Device

CAUTION



Before the boot up, make sure the input voltage matches the device power requirement.



To ensure stable operation of the device and prolong service life of HDD, provide stable

voltage with less ripple interference by reference to international standard.



For device security, connect other cables of the device first, and then connect the device

to the power socket.

Boot-up might vary depending on the model you purchased.



8-HDD series product: Press the power button on the rear panel to boot up device.



For other series products:

Connect to the power socket to boot up device.



After clicking shutdown button on the GUI to turn off the device, press the power



button for a short period of time to boot up device.

Summary of Contents for 8-HDD Series























































































Search results

Summary of Contents for 8-HDD Series

Reviews:

Related manuals for 8-HDD Series

Brands by name

Popular brands

Dahua 8-HDD Series, Quick Start Manual

Search results

Summary of Contents for 8-HDD Series

Reviews:

Related manuals for 8-HDD Series

Brands by name

Popular brands