Dahua 8-HDD Series, Quick Start Manual

Page: 20 / 86

Initial Settings 13
Quick Settings 5.2
It is to set system time, and enable NTP function according to your need. After enabling NTP
function, device can automatically synchronize time with the NTP server.
Set system time. Step 1
1) On initialization interface, click Enter quick settings .
The Time interface is displayed. See Figure 5-3.
Time Figure 5-3
2) Set system time, date and time zone.
You can set manually or set device to synchronize time with the NTP server.
Configure IP address. Step 2
Device has 4 Ethernet ports by default. Make sure at least one Ethernet port is connected to
the network before you set IP address.
1) On the Time setting interface, click Next .
The IP Set interface is displayed. See Figure 5-4.