Dahua 8-HDD Series Quick Start Manual Download Page 78

Page: 78 / 86

Intelligent Operation 71

Vehicle

Figure 6-74

Click

next to

Show Tracking Box

to enable tracking box function.

Step 3

A tracking box is displayed in the video image when target meeting detection rule is

detected.

Set features panel.

Step 4

1) Click

next to Features Panel to enable features panel function.

Features panel will be displayed at the right side of video image when target with

selected features is detected.

2) Select a vehicle information panel.

means the panel is selected.

3) (Optional) Drag

to adjust the transparency of panel. The higher the value, the

more transparent the panel.

4) (Optional) Select the features to be displayed in the panel.



Up to 4 features can be displayed.



4 features are selected by default. To select another feature, click the

selected feature to cancel it, and then click the feature to be displayed.

Click

Step 5

6.5.5.2 Live

On the

LIVE

interface, select a view, and the video image of the view is displayed. See Figure

6-75.

Summary of Contents for 8-HDD Series























































































Search results

Summary of Contents for 8-HDD Series

Reviews:

Related manuals for 8-HDD Series

Brands by name

Popular brands

Dahua 8-HDD Series, Quick Start Manual

Search results

Summary of Contents for 8-HDD Series

Reviews:

Related manuals for 8-HDD Series

Brands by name

Popular brands