![background image](http://html1.mh-extra.com/html/dahua/8-hdd-series/8-hdd-series_quick-start-manual_500052015.webp)
Hardware Installation 8
①
Press the button on the
front
panel
of
IVSS
device, open the handle,
and then pull out the HDD
box.
②
Put the HDD into the
box along the direction
shown in the figure.
③
Lock the screws on the back of the
HDD box. Insert the box into the HDD
slot, push it to the bottom, and then
close the handle.
In the figure, you only need to lock one
set of the screws (Group A or Group B).
See the actual situation.
Removing HDD
①
Press the button on the
front panel of IVSS device,
open the handle, and then
pull out the HDD box.
②
Unlock the screws on the
back of the HDD box.
The screws are at different
positions for different HDDs.
See the actual situation.
③
Take out the HDD and
reinsert the box to the slot.
Push it to the bottom and close
the box handle.
Connection Diagram
3.4
This section takes connecting 16-HDD series device for example. See Figure 3-2. The
connection steps may vary depending on the device, and the actual device shall prevail.
Display, mouse and keyboard are needed for local operation.
Before using the smart detection functions such as face detection and face recognition,
you shall install the AI module first.
Summary of Contents for 8-HDD Series
Page 1: ...Intelligent Video Surveillance Server Quick Start Guide V2 1 0 ...
Page 11: ...The Grand Tour 4 Dimensions 2 3 Dimensions with LCD mm inch Figure 2 4 ...
Page 12: ...The Grand Tour 5 Dimensions without LCD mm inch Figure 2 5 ...
Page 16: ...Hardware Installation 9 Connection diagram Figure 3 2 ...