Intelligent Operation 27
Area
Figure 6-12
Press and hold
or white dot on detect region frame, and drag to adjust
its range.
Click
or
to set human face detection minimum size or maximum
size. System triggers an alarm once the detected human size is not larger
than the maximum size or smaller than the minimum size.
Select the motion detect zone you drew. Click
to delete the zone.
2) Click
to complete the settings.
Click
Deployment Time
to select schedule from the drop-down list.
Step 6
After setting arm period, system triggers corresponding operations when there is a
motion detection alarm in the specified period.
Click
Action
to set alarm action. Refer to
user’s manual for detailed information.
Step 7
Click
Save
.
Step 8
6.2.4 Configuring Face Recognition
You can configure face comparison rule. The system compares the detected face image with
face image in the face database, and triggers an alarm when the result conforms to the
comparison rule.
Face detection shall be enabled when AI by device is used. Fo
r details, refer to “6.2.3
Click
, or click
on Setting interface, and then select
Event
.
Step 1
The
Event
interface is displayed.
Summary of Contents for 8-HDD Series
Page 1: ...Intelligent Video Surveillance Server Quick Start Guide V2 1 0 ...
Page 11: ...The Grand Tour 4 Dimensions 2 3 Dimensions with LCD mm inch Figure 2 4 ...
Page 12: ...The Grand Tour 5 Dimensions without LCD mm inch Figure 2 5 ...
Page 16: ...Hardware Installation 9 Connection diagram Figure 3 2 ...
