Pilot's Operating Handbook
Section 8
Handling, servicing and maintenance
Edition 1 - January 15, 2018
Rev. 4
Page 8.9.2
b)
Unlock backrest using backrest tilting handle (6) and fold it
forward.
●
NOTE
●
For the R.H. rear seat, backrest tilting handle is located behind backrest.
●
c)
Unlock seat using seat tilting handle (1) and tilt it forward.
>> Airplane with seats heaters system (Post-MOD70-0588-25)
▲
CAUTION
▲
Make sure to disconnect the seat heating system before the removal of
the seat to prevent harness damage.
▲
d)
Disconnect heating system harness, and clip the loose
connector to the holder located on the seat structure.
>> All
e)
Clear the carpet from under the seat to facilitate moving in rails.
>> Airplane with seats heaters system (Post-MOD70-0588-25)
f)
Open the floor hatch and clip the second loose connector to the
holder located under floor panel. Close the floor hatch.
>> All
g)
Hold the seat in tilted position and unscrew quick links (7) of
strap (9) located under L.H. seatpan.
●
NOTE
●
This operation is specific to L.H. seat.
●
h)
Pull up and hold L.H. and R.H. rings (2), and turn knobs (8) by 90
°
in order to release and keep locks (3) in up position.
i)
Move the seat in the rails to line up pads (4) with rail (5) apertures.
j)
Remove the seat.
●
NOTE
●
Ensure proper storage of strap (9) with L.H. rear seat to avoid loosing part.
●
PIM - DO NOT USE FOR FLIGHT OPERATIONS