DAF 95XF, Manual, Page: 239 / 312

1
95 XF
series Disassembly and assembly
CAB TILTING MECHANISM
5-5
Assembling lifting cylinder
Note:
The components marked in the figure form part
of the reconditioning kit (6).
1. Position the lifting cylinder upright in a vice
(connections at the top).
2. Fit the non-return valve seat (B) together
with non-return valve (A) and ring (3) into
the cylinder.
Tighten seat (B) to the specified tightening
torque, see “Technical data”.
1
2
3*
A*
B*
4
5
6*
K1 01 345
Note:
The components marked in the figure form part
of the reconditioning kit (13).
3. Slide the new dirt scraper (A) over the
piston rod.
4. Slide the new circlip (12) over the piston
rod.
5. Slide the new brass upper bearing (B) over
the piston rod, as shown.
6. Slide the new stop ring (5) over the piston
rod, ensuring that the tapered side fits into
the upper bearing.
7. Fit the new circlip (4), possibly using an
axle spring clip pliers (outer circlip pliers),
into the piston rod groove.
8. Fit the new O-ring (2).
1
2
3
4
5
6
7
8
9
10
11
12
13
A
A
C B
K1 01 346
6
ᓻ 0209