DAF 95XF, Manual, Page: 124 / 312

1
EXTERNAL CAB COMPONENTS
Inspection and adjustment
95 XF
series
3-4
Adjustment, pavement mirror
1. Remove the cap of adjusting nut (C) at the
top of the mirror.
2. Slacken the nut a few turns until the mirror
can move freely.
3. Adjust the mirror until it forms a right angle
(angle A) to the floor (angle B = 45
_
).
Lengthways the mirror should run parallel to
the side of the vehicle.
4. Tighten the bolts to the specified tightening
torque. See ”Technical data”.
B
A
C
K100236
3.3 INSPECTION AND ADJUSTMENT, HEADLIGHT WASHING SYSTEM
1. Using a felt pen, draw two adjustment
points from the centre on the headlight
glass. Determine the location of these
adjustment points using the drawing. The
outer adjustment point should always be
58 mm away from the headlight centreline.
The situation shown here applies to the
right-hand headlight glass. The mirror
image of this drawing applies to the
left-hand headlight glass.
4
ᓻ 200345