3.12.2. Starter motor
The sliding-gear starter motor is flanged to the rear of the flywheel housing on the left-hand
side. As parts of every engine overhaul, the starter pinion and ring gear should be cleaned
with a brush dipped in fuel and then a coat of grease should be applied again.
Always protect starter motor against moisture.
Warning :
Always disconnect the
battery earth cable before
starting work on the electrical
system. Connect up the earth
cable last, as there is
otherwise a risk of short-
circuits.
- 25 -
TERMINAL "B"
M10 x P1.5
TERMINAL S/W
M5 x P0.8
EA8O3008
24V x 6.0kW
2.5A(20
o
C 24V)
M
EA8O3009
Motor
S/W
KS
S/W
S/W
S
B
B
W
24V x 6.0kW
