•
Connecting rod bearing clearance
Install the connecting rod bearing in the
connecting rod bearing cap, tighten the
connecting rod cap bolts to the specified
torque, then measure the inside diame-
ter.
Compare the two values obtained
through measurement of connecting
rod bearing inside diameter with the
outside diameters of crankshaft pins to
determine the oil clearance.
•
If the clearance deviates from the
specified range, have the crankshaft
journals and pins ground and install
undersize bearings.
3) Bearing spread and crush
•
Inspection
Check to see that the bearing requires a
considerable amount of finger pressure
at reassembly operation.
- 52 -
EAMD060I
O A
Spread = O A - O B
O B
EDM2047I
Torque
28 kg
•
m
Standard Dia.
83.02~ 83.092 mm
Standard
Limit
0.049 ~ 0.119 mm
0.20 mm
