3.1.17. Water pump
•
Remove the water pipe connected to the
expansion tank.
•
Remove the water pipe and hoses con-
nected to the water pump.
•
Unscrew the water pump fixing bolts and
remove the water pump.
3.1.18. Injection pump
•
Remove the oil supply pipe and return
pipe connected to the fuel injection pump.
•
Unscrew the bolts connecting the cou-
pling and drive shaft, loosen the injection
pump attaching bolts, then disassemble
the injection pump.
NOTE : As far as possible, place the
No.1 cylinder in ‘OT’ position to
disassemble the injection pump.
•
Release the pump fixing bracket bolts to
disassemble the bracket from the cylin-
der block.
NOTE : Do not interchange the shims as
they must be installed in their
original positions at reassembly.
3.1.19. Oil filter
•
Using a filter remover wrench, remove
the oil filter cartridge.
•
Remove the pipe connected to the oil
cooler.
•
Loosen the oil filter fixing bolts and dis-
assemble the oil filter head from the
cylinder block.
- 33 -
EAMD021I
EAMD022I
