Daemyung Webgate Hybrid DVR Series, User Manual

Page: 75 / 118

74
Event Record
Select frame rate (number of frame per second) and quality that are applied when event occurs. When event occurs
DVR starts to record by the frame rate and quality of Event Record.
FPS
FPS (frames per second) users can select 1 to 30fps per second. Max. Frame can be changed according to the
configuration.
Quality
This configures the recording quality. Value of Q can be configured between 1-10. The higher the number, the better
recording quality is.
Record capacity in use and minimum storable time consumption
It indicates record capacity status of DVR along with amount of connected HDD.
It also indicates storable time of all channels, only channels in use and expected storable time based on amount of
storage duing last 24 hours.
Quick Setting
Apply the same setting for all channels at once.
<Notice>
1. If the recording setting exceeds 100% of the ‘Record capacity usage’, ‘Program’ page can not be closed. Please check the ‘Record
capacity usage’ window.
2. The video quality of IP camera can be set in web page of IP camera, not in ‘Program’ page.
3. Frame rate (fps) of event record can not be set less than frame rate of normal record.
- If frame rate for normal recording and event recording is the same, lowering the frame rate for event recording will
lower the frame rate for normal recording.
- If frame rate for normal recording and event recording is the same, increasing the frame rate for normal recording will
increase the frame rate for event recording.
4. Event record setting and normal record setting are independent.
- If the frame rate of event record is 5 fps, it records at 5 fps when event occurs regardless of the normal record setting.