Daemyung Webgate Hybrid DVR Series, User Manual

Page: 70 / 118

69
EVENT SOURCES
Check Sensor, Motion detection, Text or systems for activating event.
System event sources of HDD Fail, RAID fail, fan fail, password fail,
WRS registration fail, power on and recording fail can be checked
(some or all)
HDD Fail
Event notification for HDD performance problems or connection status
problems.
HDD Almost Full
Event notification when data stored in HDD is larger than the set value.
It is activated when “HDD Fail” is checked.
RAID Fail
Event notification when RAID status has problem.
Fan Fail
Event notification when fan is not operated.
Password Fail
Event notification when login password is incorrect.
WRS Registration Fail
Event notification when WRS registration is failed.
Power On
Relay will be operated during set action time when DVR is power on.
Recording Fail
If recording is not working normally, popup window pops up with
buzzer. Until HDD is recovered, popup window will pop up with buzzer
every 10 minutes after user click ‘Ok’.
E-mail Configuration
Recipient Address
Input E-mail address with receiver’s E-mail info.
E-mail format should be xxxx@xxxxxx.xxx and the users must only
use combination of numbers and the English letters
Max. 3 recipients can be registered.
Sender’s E-mail address
Sender’s E-mail address is set when user use E-mail for output
selection and user setup E-mail address as xxxx@xxxxxx.xxx.
Subject
User can modify the subject of e-mail. Max. 20 letters including
symobls are supported.
Picture attachment
When sensor, motion detector and video loss occur, relevant event info
with channel video will be sent to an e-mail. Only system event info
will be sent for system event.