Daemyung Webgate Hybrid DVR Series, User Manual

Page: 58 / 118

57
P2P *
Input UID of P2P connection information in mobile application
(Android or i-phone) or scan QR code. Remote network connection can
be made easily without further configuration.
*
Adopted differently based on product specification
DDNS
User can give a domain name to a DVR by using DDNS service, WNS.
DDNS setting at a DVR
1. Change DVR’s port which is not in use (e.g. 8000)
2. Configure router’s port forwarding setting. (i.e. port 8000 should be
connected to DVR)
3. Activate DDNS(WNS) at DVR menu
4. Enter domain to use and run “domain change” (Ex: test)
5. If the entered domain name is available, DVR shows “Success”. If the
domain name is occupied by another user, DVR shows “Unavailable
domain”.
6. If you can connect a DVR by using assigned domain name, it means
DDNS setting is properly completed.
(e.g. http://test.mycam.to:8000)
DDNS setting at a PC
1. Change DVR’s port which is not in use (e.g. 8000)
2. Configure router’s port forwarding setting. (i.e. port 8000 should be
connected to DVR)
3. Activate DDNS(WNS) at DVR menu
4. Enter http://www.mycam.to into browser and connect to DDNS site.
5. Login by using DDNS account
(If you do not have DDNS account, you can create it by “Create an
account”)
6. Click “+Add” button to add a domain.
7. Enter a domain (e.g. test) then click “Check Name” to check the
availability.
8. If the entered domain name is available, it shows “Entered domain
is available for use.” If the domain name is occupied by another user,it
shows “Someone is already using this domain. Please try another.”
9. Enter DVR’s serial number to “Serial Number” input.
10. Enter necessary information into “Description” and click “Add”
button.
11. If you can connect a DVR by using assigned domain name, it means
DDNS setting is properly completed.
(e.g. http://test.mycam.to:8000)
Menu

Network

DDNS
DDNS setting at a DVR