Daemyung Webgate Hybrid DVR Series, User Manual

Page: 73 / 118

72
Recording Set Up
Record mode has 3 types as normal/event, schedule/event, emergency record.

Normal/Event record – Record start up upon bootup according to defined program.

Schedule/Event record – Record start up upon defined schedule’s program and time.

Emergency record – Record at max setup regardless of record mode and program. It can be turned on
or off by REC button of remote controller.
Recording
Both normal/event, schedule/event record can be achieved by selecting program and frame speed and quality
will be defined by program selection. Plesae check each program’s setup (frame, quality) before setup record
mode.
Normal/Event Record
Record starts up upon defined program setup.
Program can be selectable among 9 mode from A to I.
<Note>
1. Event record means the recording when motion is detected, or sensor,
text, flame detection are occurred. Normal record means the recording
when event is not occurred.
2. ‘Event record’ can set the video quality and frame rate (fps) for event
recording. This setting is applied only for event recording. ‘Normal
record’ setting is independent from ‘Event record’ setting. ‘Normal
record’ can set the video quality and frame rate for normal recording.
3. Event record is more important than normal record, and thus, frame
rate of event record can not be set less than the frame rate of normal
record.
4.
The video quality of IP camera can be set in web page of IP camera,
not in ‘Program’ page.
Schedule/Event Record
Record upon defined schedule’s program and time.
Program can be selected among 9 from A to I then can be applied
to each schedule. One program can be applied on one schedule, at
least one schedule per day and max 50 schedules per week can be
defined.
Schedule setup
Select program, time, record start and record end. All this will be
programmed and displayed.
menu

record

record