Daemyung Webgate Hybrid DVR Series, User Manual

Page: 64 / 118

63
Patrol Config
• Preset: Set the sequence of presets.
• Interval(Sec): Set the interval of each preset. After interval time, PTZ is
moved to the next preset position. The range of interval time is 1 ~ 255
sec.
• Preset Rotation: Setting the preset number to rotate. If you set "5",
patrol will be operated from "preset" number 1 to "preset" number 5.
<Note>
1. Interval time includes the moving time of PTZ device.
2. During patrol, the current patrol number is displayed on the right upper side.
3. The number of patrols is 8 and each patrol can have 8 presets.
Monitor
Configure SEQ, MULTI, VGA/Analog output, VGA Resolution, Spot
Sequence.
* Can be different by the spec of model.
Sequence configuration
This menu is to edit function of user sequence configuration. User can configure
16 sequence modes and dwell time is available to set from 5 to 60 seconds.
For sequence mode, users can configure channel or division mode and sequence
time from 5 to 60 seconds. If user set it to Off, this function will not work.
The default value of "Restore after Event-Popup" is off. If alarm popup occurs
during sequence mode, sequence mode will be stopped under this condition.
But, if "Restore after Event-Popup" is on, sequence mode will be activated again
after alarm popup time finishes.
Sequence mode starts when user pushes [SEQ] button.
To escape from Sequence mode, please, push [SEQ] button one more time.
menu

device

monitor