DAELIM S2-250, Service Manual

Page: 166 / 201

INSTALLATION
●
Install the brack caliper to the front fork and tighten the
bolt to specified torque.
TORQUE VALUE : 3.0kgf
·
m
●
Connect the brcakhose to the caliper body and tighten 2
oil bolts and washers to specified torque.
TORQUE VALUE : 3.4kgf
·
m
●
Fill the break fluid to te upper limit line and bleed air.
REAR WHEEL
REMOVAL
●
Remove the exhaust muffler.
●
Remove the rear brake caliper.
●
Remove the rear fork.
●
Remove the rear axle collar.
●
Remove the rear wheel.
●
Rotate the inner bearing with finger and check it for
smooth operation.
●
Check the malfunction and replace if necessary.
REAR FORK
●
Remove the muffler.
●
Remove the rear breake caliper.
●
Loosen the lower bolt securing the RH. rear cushion.
●
Loosen 2 bolts securing the mud guard.
●
Loosen the axle nut and remove the collar.
●
Loosen 2 bolts securing the engine and remove the rear
fork.
15-5
REAR WHEEL / BRAKE / SUSPENSION / SWING ARM