DAELIM S2-250, Service Manual

Page: 187 / 201

18-6
STARTER SYSTEM
Starter magnetic switch voltage
●
Measure the voltage between the yellow / red wire (+)
and ground at the starter magnetic switch connector.
●
If battery voltage appears only when the starter switch
is pressed, it is normal.
Starter magnetic switch ground line
●
Disconnect the wire connector from the starter
magnetic switch and check for continuity between the
ground wire (green / yellow) and ground.
OPERATION CHECK
●
Disconnect the magnetic switch wire connector.
●
Apply battery voltage between terminals, when the
yellow / red wire is connected to the positive (+)
battery terminal and the green / yellow wire to the
negative (-) battery terminal.
●
If there is continuity between battery and motor
terminal, it is normal.
REMOVAL
●
Release the seat lock with the main key.
●
Remove the luggage box.
●
Remove the center cover.
●
Remove the battery (+) cable from the starter magnetic
switch terminal.
●
Remove the starter motor cable from the starter
magnetic switch terminal.
●
Disconnect the yellow / red connector and green /
yellow connector from the wire harness.
●
Remove the starter magnetic switch from the switch
setting bracket securing the frame.
●
Install in the reverse order of removal.