DAELIM S2 125, Service Manual

Page: 79 / 184

8-2
A.C GENERATOR/STARTER CLUTCH
●
Loosen the RH. shroud 4 flange bolts and 4 tapping
screws.
●
Remove the RH. shroud.
●
Loosen the LH. shroud setting screw.
●
Remove the LH. shroud.
●
Install in the reverse order of removal.
A.C GENERATOR
REMOVAL
●
Loosen the rear cushion under bolt.
●
Remove the following parts.
-
Luggage box (
⇨
3-2 )
-
Body cover (
⇨
3-4
)
-
Center cover (
⇨
3-3 )
-
Engine (
⇨
6-2 )
-
RH. shroud comp (
⇨
8-2
)
SHROUD
REMOVAL
●
Remove the following parts.
-
Luggage box (
⇨
3-2 )
-
Center cover (
⇨
3-3
)
-
Engine (
⇨
6-2
)
●
Remove the A.C.G wiring coupler and connector
connected to the wire harness.
●
Remove the A.C.G wiring from the A.C.G wiring
setting clamp securing the engine and frame.
●
Loosen the 3 cooling fan bolts.
·
Before removing the RH. shroud, be sure to remove
the RH. floor side cover and rear cushion upper bolt.
SETTING SCREW
LH. SHROUD
A.C.G WIRING
COUPLER
COOLING FAN