DAELIM S2 125, Service Manual

Page: 83 / 184

8-6
A.C GENERATOR/STARTER CLUTCH
REDUCTION GEAR
SHAFT
RH. CRANKCASE COVER
STARTER CLUTCH
SPECIAL SOCKET
(12.7X28X120)
STARTER REDUCTION GEAR
INSTALLATION
●
Install the starter reduction gear and shaft.
STARTER CLUTCH
REMOVAL
●
Loosen the rear cushion under bolt.
●
Remove the following parts.
-
RH. floor side cover (
⇨
3-4 )
-
RH. shroud (
⇨
8-2
)
-
Cooling fan (
⇨
8-2 )
-
A.C Generator (
⇨
8-2 )
-
EX. muffler (
⇨
3-8
)
-
Rear caliper (
⇨
13-3 )
-
Rear swing arm (
⇨
13-7 )
-
RH. crankcase cover (
⇨
8-4
)
●
Remove the LH. crankcase cover and hold the drive
face with the drive face holder.
●
Loosen the starter clutch lock nut with a special socket.
TORQUE VALUE : 9.5 kgf
·
m
TOOLS : SPECIAL SOCKET (12.7x28x120)
DRIVE FACE HOLDER
●
Remove the gasket residues from the RH. crankcase.
●
Install a new gasket and dowel pin.
●
Tighten the RH. crankcase cover with setting bolts.
●
Install the following parts.
-
A.C.Generator (
⇨
8-2
)
-
Cooling fan (
⇨
8-2
)
-
RH. shroud (
⇨
8-2 )
-
Rear swing arm (
⇨
13-7
)
-
Rear caliper (
⇨
13-3
)
-
EX. muffler (
⇨
3-8 )
-
RH. floor side cover (
⇨
4-7
)
-
Luggage box (
⇨
3-2
)
●
Tighten the rear cushion under bolt.