DAELIM HISTORY 125 - SERVICE, Service Manual

Page: 48 / 208

WIND SCREEN /
FRONT HANDLE COVER
●
Loosen the 3 screen setting screws securing the
front handle cover.
●
Pulling the cover to the under slightly and remove
the wind screen from the front handle cover groove.
●
Loosen the 4 tapping screws (FR./RR.) securing the
rear handle cover.
●
Loosen the front handle cover LH./RH. setting pan
screws (2EA) securing the steering handle.
●
Remove the handle cover, disconnect the RH./LH.
winker wiring.
●
Remove the 3 wind screen setting nuts securing the
front handle cover.
●
Loosen the RH./LH. winker setting hex nuts
securing the front handle cover, remove the
RH./LH. winker.
●
Install in the reverse order of removal.
REAR HANDLE COVER
●
Remove the front handle cover. (
⇨
4-10)
●
Loosen the 2 tapping screws securing the steering
handle.
●
Remove the speedometer cable from the meter.
●
Disconnect the stop switch wiring of the RH./LH.
master cylinder assembly.
●
Disconnect the winker relay wiring securing the winker
relay.
●
Remove the rear handle cover from the steering handle.
●
Disconnect the right and left switch wiring, remove the
switches.
●
Loosen the 4 speedometer setting tapping screws
securing the rear handle cover.
●
Remove the rear handle cover.
●
Install in the reverse order of removal.
NOTE
•
Check each switch for proper operation after
installation.
•
Wires and cables must be connected properly.
4-10
TAPPING SCREW
TAPPING SCREW
LH. WINKER ASSEMBLY
RH. WINKER ASS'Y
FRONT
HANDLE COVER
HEX NUT
SETTING SCREW
SPEEDOMETER ASSEMBLY
TAPPING SCREW
REAR HANDLE COVER
TAPPING SCREW
TAPPING SCREW
EXTERNAL PARTS