DAELIM HISTORY 125 - SERVICE, Service Manual

Page: 156 / 208

REAR CUSHION INSTALLATION
●
Install the spring, stopper rubber to the damper
component.
NOTE
·
Install the spring with its narrow pitch side facing
upward.
●
Apply thread locking agent to the hex nut, and install
the rear cushion compressor attachment on the damper
rod.
●
Fix the upper metal, and tighten the hex nut.
TORQUE VALUE : 3.0~4.5kgf
·
m
TOOLS : REAR CUSHION COMPRESSOR
REAR CUSHION COMPRESSOR ATTACHMENT
●
Install the rear cushion.
●
Tighten the top and bottom of the cushion with bolts.
TORQUE VALUE : UPPER SIDE 3.5~4.5kgf
·
m
LOWER SIDE 3.5~4.5kgf
·
m
●
Install the luggage box. (
⇨
4-4 )
REAR SWING ARM
REMOVAL
●
Remove the EX. muffler.
(
⇨
4-12 )
●
Remove the rear brake caliper.
(
⇨1
4-6 )
●
Loosen the flange bolt securing the RH. crank case
cover.
●
Loosen the rear axle U-nut.
●
Remove the rear swing arm.
DISASSEMBLY
●
Disassemble the rear wheel outside collar from the rear
swing arm.
●
Disassemble the oil seal (28
×
42
×
7) and radial ball
bearing (6302UU).
●
Install in the reverse order of removal.
TORQUE VALUE
- REAR WHEEL AXLE NUT : 6.0~8.0 kgf
·
m
13-8
REAR WHEEL/BRAKE/SUSPENSION/REAR SWING ARM
REAR CUSHION COMPRESSOR ATTACHMENT
REAR CUSHION COMPRESSOR
REAR
CUSHION
FLANGE BOLT
AXLE U-NUT
REAR SWING ARM