DAELIM HISTORY 125 - SERVICE, Service Manual

Page: 75 / 208

MOVABLE DRIVE FACE INSPECTION
●
The weight rollers push on the movable drive face (by
centrifugal force); worn or damaged weight rollers will
interfere with this force.
●
Check the rollers for wear or damage and replace as
necessary.
●
Measure the O.D. of each roller, replace if the service
limit is exceeded.
SERVICE LIMIT : 19.5mm
●
Check the drive face boss for wear or damage and
replace as necessary.
●
Measure the O.D of the drive face boss. Replace the
boss if the service limit is exceeded.
●
Measure the I.D. of the drive face. Replace it if the
service limit is exceeded.
●
Movable drive face boss outer diameter.
SERVICE LIMIT : 23.960mm
●
Movable drive face inner diameter.
SERVICE LIMIT : 24.025mm
MOVABLE DRIVE FACE INSTALLATION
●
Install the weight roller on the movable drive face.
●
Install the ramp plate.
●
Apply the inside of the movable drive face with the
specified amount of grease.
SPECIFIED GREASE : ALVANIA EP2
GREASE APPLICATION : 0.5-1.5 g
●
Install the movable drive face boss.
NOTE
·
Do not get the grease on the drive face. Remove any
misplaced grease with a degreasing agent.
·
Use only the specified grease in the specified amount.
7-9
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION
WEIGHT ROLLER
RAMP PLATE
MOVABLE DRIVE FACE
WEIGHT ROLLER
MOVABLE DRIVE FACE
BOSS