Dabi Atlante EAGLE, User Manual

Page: 51 / 78

50
12. PROCEDURES FOR REUSE
12.1. CLEANING

Using a clean moist cloth product, clean the equipment’s surface such as the head
positioner, patient handles, nose support, silicon chin rest cover, chin rest, ear rods,
temple stabilizers on a regular basis.

It is recommended to use a moist cloth product with the following chemical properties:
corrosion inhibitor, humectant effect, flotator; high tension-active power, anti-static
effect, biodegradable, non-toxic, non-flammable.

The use of other chemical products is not recommended as it may damage the
equipment.
CAUTION
DO NOT USE ORGANIC SOLVENTS, SUCH AS THINNER, TO
CLEAN THE EQUIPMENT. IN CASE THE DEVELOPING SOLUTION
IS SPILLED ON THE PANEL, CLEAN IT IMMEDIATELY, SINCE
SUCH SOLUTIONS MAY DISCOLOR IT.
12.2. DISINFECTION

To ensure the prevention of cross-contamination, the operator must dispose of the bite
guide after each usage.
CAUTION
ALWAYS TURN OFF THE MAIN SWITCH BEFORE PERFORMING
DAILY MAINTENANCE PROCEDURES.
CAUTION
AVOID SPILLING WATER OR OTHER SOLUTIONS INSIDE THE
EQUIPMENT, AS IT COULD CAUSE SHORT CIRCUITS.
CAUTION
FOR CLEANING, DO NOT USE MICRO ABRASIVE MATERIALS,
STEEL WOOL, ORGANIC SOLVENTS OR SOLVENT-CONTAINING
DETERGENTS, SUCH AS ETHER, STAIN REMOVER, GASOLINE,
ETC.