9
3.6.2.WARNING AND/OR CAUTION DURING EQUIPMENT USE
The equipment must be operated only by qualified and trained professionals
(dentists, radiology technicians, hygienists or engineers).
Always observe the display messages, the equipment as a whole and the
patient in order to detect any arising problems early.
In case occasional maintenance is required, use only services provided by
Authorized Service Technicians.
The equipment has been designed to withstand continual and intermittent
operation; therefore, follow the cycles described in these operation
instructions.
Since radiation exposure can cause damage to human cells, it is
recommended that no one should remain in the radiographic examination
room, unless the patient requires restraint. In this case, such individual must
be properly protected against X-Ray emission.
Although this equipment has been designed according to electromagnetic
compatibility standards, it may, under very extreme conditions, interfere with
other equipment. Do not use it with other devices that are sensitive to
interference or with devices that create high electromagnetic disturbances.
ATTENTION
THE MANUFACTURER SHALL NOT BE LIABLE IN CASE:
THE X-RAY MACHINE IS USED FOR PURPOSES OTHER
THAN THOSE FOR WHICH IT HAS BEEN DESIGNED.
DAMAGE CAUSED TO THE EQUIPMENT, THE OPERATOR
AND/OR PATIENT AS A RESULT OF IMPROPER
INSTALLATION AND MAINTENANCE PROCEDURES IN
DISAGREEMENT WITH THE OPERATION INSTRUCTIONS
ACCOMPANYING THE EQUIPMENT.
IMPROPER EQUIPMENT OPERATION.
3.6.3. WARNING AND/OR CAUTION AFTER EQUIPMENT USE/OPERATION
Turn off the x-ray machine's master switch when it is not used for long
periods of time.
Always keep the equipment clean for its next operation.
If the equipment is defective, do not try to fix it yourself, instead call for
authorized technical assistance.
Do not replace any equipment parts. Do not disconnect the cable or other
connections unnecessarily.
The EAGLE Panoramic X-Ray Machine must be off when other equipment
such as an electric scalpel or other similar devices are being used.
Summary of Contents for EAGLE
