Dabi Atlante EAGLE, User Manual

Page: 31 / 78

30
8.5. TURNING THE EQUIPMENT ON
ATTENTION
THE UNIT IS CONFIGURED FOR A LINE VOLTAGE DURING
INSTALLATION BY THE TECHNICIAN ONLY. THIS IS A TECHNICAL
PROCEDURE AND CANNOT BE DONE BY THE USER.
ATTENTION
BEFORE TURNING ON THE UNIT MAKE SURE THE UNIT IS
CONNECTED TO THE CORRECT VOLTAGE.
To turn on or off the unit use the on/off switch on the base of the equipment.
When the main switch is turned on, the machine will perform a self-check. If
everything is within specifications, the display will show the x-ray counter.
During the self-check, the following screen will be shown on the display:
The machine can be configured to display an exposure counter that is displayed
after the machine initialization and after each exposure.
Note: The exposure counter can be hidden by an authorized technician.