manualshive.com logo in svg

D-Link xStack DGS-3120-48PC, Reference Manual

The D-Link xStack DGS-3120-48PC is a powerful network switch offering 48 Ethernet ports and PoE support. To fully understand and maximize its features, it is essential to refer to the Reference Manual. Download the comprehensive manual for free from our website for detailed instructions on optimizing your network setup.

Share
Download
background image

xStack

® 

DGS-3120 Series Managed Switch CLI Reference Guide 

215 

 

destination_ip

 - (Optional) Specify an IP destination address. 

<ipaddr>

 - Enter the destination IP address used for this configuration here. 

mask

 - (Optional) Specify the mask. 

<netmask>

 - Specify the mask. 

dscp

 - (Optional) Specify the value of DSCP, the value can be configured 0 to 63. 

<value>

 - Enter the DSCP value used here. 

icmp

 - (Optional) Specify that the rule applies to ICMP traffic. 

type

 - Specify that the rule applies to the value of  ICMP type traffic. 

<value 0-255>

 - Enter the ICMP type value here. This value must be between 0 and 255. 

code

 - Specify that the rule applies to the value of ICMP code traffic. 

<value 0-255>

 - Enter the ICMP code value here. This value must be between 0 and 255. 

igmp

 - (Optional) Specify  that the rule applies to IGMP traffic. 

type

 - Specify that the rule applies to the value of IGMP type traffic. 

<value 0-255>

 - Enter the IGMP type value here. This value must be between 0 and 255. 

tcp

 - (Optional) Specify that the rule applies to TCP traffic. 

src_port

 - Specify that the rule applies the range of TCP source port. 

<value 0-65535>

 - Enter the source port value here. This value must be between 0 and 

65535. 

mask

 - (Optional) Specify the mask. 

<hex 0x0-0xffff>

 - Specify the mask. 

dst_port

 - Specify the range of TCP destination port range. 

<value 0-65535>

 - Enter the destination port value here. This value must be between 0 

and 65535. 

mask

 - (Optional) Specify the mask. 

<hex 0x0-0xffff>

 - Specify the mask. 

flag

 - (Optional) Specify the TCP flag fields .   

all

 - Specify that the TCP flag field mask will be set to all. 

urg

 - Specify that the TCP flag field mask will be set to urg. 

ack

 - Specify that the TCP flag field mask will be set to ack. 

psh

 - Specify that the TCP flag field mask will be set to psh. 

rst

 - Specify that the TCP flag field mask will be set to rst. 

syn

 - Specify that the TCP flag field mask will be set to syn. 

fin

 - Specify that the TCP flag field mask will be set to fin. 

udp

 - Specify that the rule applies to UDP traffic. 

src_port

 - (Optional) Specify the range of UDP source port range. 

<value 0-65535>

 - Enter the source port value here. This value must be between 0 and 

65535. 

mask

 - (Optional) Specify the mask. 

<hex 0x0-0xffff>

 - Specify the mask. 

dst_port

 - (Optional) Specify the range of UDP destination port mask. 

<value 0-65535>

 - Enter the destination port value here. This value must be between 0 

and 65535. 

mask

 - (Optional) Specify the mask. 

<hex 0x0-0xffff>

 - Specify the mask. 

protocod_id

 - Specify that the rule applies to the value of IP protocol ID traffic. 

<value 0-255>

 - Enter the protocol ID value here. This value must be between 0 and 255. 

user_define

 - (Optional) Specify that the rule applies to the IP protocol ID and the mask options 

behind the IP header length is 20 bytes. 

<hex 0x0-0xffffffff>

 - Enter the user-defined IP protocol ID mask here. 

mask

 - (Optional) Specify the mask. 

<hex 0x0-0xffffffff>

 - Specify the mask. 

packet_content

 - Specify the frame content pattern, there are 5 offsets in maximum could be 

configure. Each offset presents 16 bytes, the range of content of frame is 80 bytes(5 offsets) 
in the first eighty bytes of frame. 

offset_0-15

 - (Optional) Specify that the mask pattern offset of the frame will be between 0 

and 15. 

<hex 0x0-0xffffffff>

 - Enter the mask pattern offset of the frame between 0 and 15 here. 

offset_16-31

 - (Optional) Specify that the mask pattern offset of the frame will be between 16 

and 31. 

Summary of Contents for xStack DGS-3120-48PC














































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-48PC

D-Link DES-7200 User Manual preview
DES-7200
Brand: D-Link Pages: 100
D-Link DES-3226L Manual preview
DES-3226L
Brand: D-Link Pages: 134
D-Link DES-3010F Command Line Interface Manual preview
DES-3010F
Brand: D-Link Pages: 187
D-Link DES-3010F Manual preview
DES-3010F
Brand: D-Link Pages: 225
D-Link DES-1048G Manual preview
DES-1048G
Brand: D-Link Pages: 31
D-Link DES-1050G User Manual preview
DES-1050G
Brand: D-Link Pages: 35
D-Link DES-1016D - Switch Quick Install Manual preview
DES-1016D - Switch
Brand: D-Link Pages: 19
D-Link COVR-2202 User Manual preview
COVR-2202
Brand: D-Link Pages: 107
D-Link AirPlusXtremeG DI-624 Troubleshooting preview
AirPlusXtremeG DI-624
Brand: D-Link Pages: 5
D-Link DGS-1210-28P Getting Started Manual preview
DGS-1210-28P
Brand: D-Link Pages: 48
H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Brand: H3C Pages: 6
3Com OfficeConnect 3CP4144 How To Set Up preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 4
3Com OfficeConnect 3CP4144 Release Note preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 2
H3C MSR 20-20 User Manual preview
MSR 20-20
Brand: H3C Pages: 60
H3C MSR 20 Series Manual preview
MSR 20 Series
Brand: H3C Pages: 149
3Com 3C13636 Installation Manual preview
3C13636
Brand: 3Com Pages: 27
Patton electronics 1090 Service Manual preview
1090
Brand: Patton electronics Pages: 8
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23

Brands by name

Popular brands

Load more brands