manualshive.com logo in svg

D-Link xStack DGS-3120-48PC, Reference Manual

The D-Link xStack DGS-3120-48PC is a powerful network switch offering 48 Ethernet ports and PoE support. To fully understand and maximize its features, it is essential to refer to the Reference Manual. Download the comprehensive manual for free from our website for detailed instructions on optimizing your network setup.

Share
Download
background image

xStack

® 

DGS-3120 Series Managed Switch CLI Reference Guide 

91 

 

<ipaddr>

 - Enter the destination IP address used for this configuration here. 

mask

 - Specify an additional mask parameter that can be configured. 

<netmask>

 - Enter the destination netmask used here. 

dscp

 - (Optional) Specify the value of DSCP. The DSCP value ranges from 0 to 63.

 

<value>

 - Enter the DSCP value here. 

icmp

 - (Optional) Specify to configure the ICMP parameters. 

type

 - Specify that the rule will apply to the ICMP Type traffic value. 

<value 0-255>

 - Enter the ICMP type traffic value here. This value must be between 0 and 

255. 

code

 - Specify that the rule will apply to the ICMP Code traffic value. 

<value 0-255>

 - Enter the ICMP code traffic value here. This value must be between 0 and 

255. 

igmp

 - (Optional) Specify to configure the IGMP parameters. 

type

 - Specify that the rule will apply to the IGMP Type traffic value. 

<value 0-255>

 - Enter the IGMP type traffic value here. This value must be between 0 and 

255. 

tcp

 - Specify to configure the TCP parameters. 

src_port

 - (Optional) Specify that the rule will apply to a range of TCP source ports. 

<value 0-65535>

 - Enter the TCP source port value here. This value must be between 0 

and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the source port mask here. 

dst_port

 - (Optional) Specify that the rule will apply to a range of TCP destination ports. 

<value 0-65535>

 - Enter the TCP destination port value here. This value must be between 

0 and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the destination port mask here. 

flag

 - (Optional) Specify the TCP flag fields.   

all

 - Specify that all the TCP flags will be used in this configuration. 

urg

 - Specify that the TCP flag field will be set to 'urg'. 

ack

 - Specify that the TCP flag field will be set to 'ack'. 

psh

 - Specify that the TCP flag field will be set to 'psh'. 

rst

 - Specify that the TCP flag field will be set to 'rst'. 

syn

 - Specify that the TCP flag field will be set to 'syn'. 

fin

 - Specify that the TCP flag field will be set to 'fin'. 

udp

 - Specify to configure the UDP parameters. 

src_port

 - (Optional) Specify the UDP source port range. 

<value 0-65535>

 - Enter the UDP source port value here. This value must be between 0 

and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the source port mask here, 

dst_port

 - (Optional) Specify the UDP destination port range. 

<value 0-65535>

 - Enter the UDP destination port value here. This value must be between 

0 and 65535. 

mask

 - (Optional) Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the destination port mask here. 

protocol_id

 - Specify that the rule will apply to the value of IP protocol ID traffic. 

<value 0-255>

 - Enter the protocol ID used here. 

user_define

 - (Optional) Specify that the rule will apply to the IP protocol ID and that the mask 

options behind the IP header , which has a length of 20 bytes. 

<hex 0x0-0xffffffff>

 - Enter the user-defined mask value here. 

mask

 - Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffffffff>

 - Enter the mask value here. 

packet_content

 - A maximum of 11 offsets can be specified. Each offset defines 2 bytes of data 

which is identified as a single UDF field. The offset reference is also configurable. It can be 
defined to start at the end of the tag, the end of the ether type or the end of the IP header. To 
qualify the fields before the end of the tag, the destination address, source address, and the 
VLAN tags are also included 

offset_chunk_1

 – (Optional) Specify the value of the packet bytes to be matched. Offset 

Summary of Contents for xStack DGS-3120-48PC














































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-48PC

Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
H3C SR6600 Series Faq preview
SR6600 Series
Brand: H3C Pages: 22
H3C S5800-60C-PWR Ordering Manual preview
S5800-60C-PWR
Brand: H3C Pages: 3
Zonet ZEW1505 Quick Installation Manual preview
ZEW1505
Brand: Zonet Pages: 10
Samsung NAS Series Hardware User Manual preview
NAS Series
Brand: Samsung Pages: 65
Avid Technology MediaStream ConnectPlus 1000 Installation And Operation Manual preview
MediaStream ConnectPlus 1000
Brand: Avid Technology Pages: 74
NETGEAR RP334 Installation Manual preview
RP334
Brand: NETGEAR Pages: 2
Measurement Computing PC-CARD DAS16 User Manual preview
PC-CARD DAS16
Brand: Measurement Computing Pages: 27
B&B Electronics Parallel Printer Card PIOC User Manual preview
Parallel Printer Card PIOC
Brand: B&B Electronics Pages: 16
Waves MaxxBCL Manual preview
MaxxBCL
Brand: Waves Pages: 41
Renesas H8/3864 Series User Manual preview
H8/3864 Series
Brand: Renesas Pages: 20
Rosewill RC-402 User Manual preview
RC-402
Brand: Rosewill Pages: 3
ADC HiGain H2TU-R-402 List 7A Quick Installation preview
HiGain H2TU-R-402 List 7A
Brand: ADC Pages: 7
Renesas H8S/2633 User Manual preview
H8S/2633
Brand: Renesas Pages: 28
Promise Technology VTrak J310S Quick Start Manual preview
VTrak J310S
Brand: Promise Technology Pages: 26
Solwise 3GWIFIMRD User Manual preview
3GWIFIMRD
Brand: Solwise Pages: 231
Compal KALA0 Schematics Document preview
KALA0
Brand: Compal Pages: 47
RR-Concepts StationMaster Manual preview
StationMaster
Brand: RR-Concepts Pages: 12

Brands by name

Popular brands

Load more brands