manualshive.com logo in svg

D-Link xStack DGS-3120-48PC, Reference Manual

The D-Link xStack DGS-3120-48PC is a powerful network switch offering 48 Ethernet ports and PoE support. To fully understand and maximize its features, it is essential to refer to the Reference Manual. Download the comprehensive manual for free from our website for detailed instructions on optimizing your network setup.

Share
Download
background image

xStack

® 

DGS-3120 Series Managed Switch CLI Reference Guide 

211 

 

<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_16-31 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>} | ipv6 class | 
flowlabel | source_ipv6_mask <ipv6mask> | destination_ipv6_mask <ipv6mask>}] 

 

Parameters 

profile_id

 - Specify the profile ID used here. 

<value 1-5>

 - Enter the profile ID value here. This value must be between 1 and 5. 

ethernet

 - Specify that the profile type will be Ethernet. 

vlan

 - (Optional) Specify a VLAN mask. 

source_mac

 - (Optional) Specify the source MAC mask. 

<macmask>

 - Enter the source MAC mask here. 

destination_mac

 - (Optional) Specify the destination mac mask. 

<macmask>

 - Enter the destination MAC mask here. 

802.1p 

- (Optional) Specify 802.1p priority tag mask. 

ethernet_type

 - (Optional) Specify the ethernet type mask. 

ip

 - Specify that the profile type will be IP. 

vlan

 - (Optional) Specify a VLAN mask. 

source_ip_mask

 - (Optional) Specify an IP source submask. 

<netmask>

 - Enter the IP source submask here. 

destination_ip_mask

 - Specify an IP destination submask. 

<netmask>

 - Enter the IP destination submask here. 

dscp

 - Specify the DSCP mask. 

icmp

 - Specify that the rule applies to ICMP traffic. 

type

 - (Optional) Specify that the rule applies to ICMP type traffic. 

code

 - (Optional) Specify that the rule applies to ICMP code traffic. 

igmp

 - Specify that the rule applies to IGMP traffic. 

type

 - (Optional) Specify that the rule applies to IGMP type traffic. 

tcp

 - Specify that the rule applies to TCP traffic. 

src_port_mask

 - (Optional) Specify the TCP source port mask. 

<hex 0x0-0xffff>

 - Enter the source TCP port mask here. 

dst_port_mask

 - (Optional) Specify the TCP destination port mask. 

<hex 0x0-0xffff>

 - Enter the destination TCP port mask here. 

flag_mask

 - (Optional) Specify the TCP flag field mask. 

all

 - Specify that the TCP flag field mask will be set to all. 

urg

 - Specify that the TCP flag field mask will be set to urg. 

ack

 - Specify that the TCP flag field mask will be set to ack. 

psh

 - Specify that the TCP flag field mask will be set to psh. 

rst

 - Specify that the TCP flag field mask will be set to rst. 

syn

 - Specify that the TCP flag field mask will be set to syn. 

fin

 - Specify that the TCP flag field mask will be set to fin. 

udp

 - Specify that the rule applies to UDP traffic. 

src_port_mask

 - (Optional) Specify the UDP source port mask. 

<hex 0x0-0xffff>

 - Enter the source UDP port mask here. 

dst_port_mask

 - (Optional) Specify the UDP destination port mask. 

<hex 0x0-0xffff>

 - Enter the destination UDP port mask here. 

protocod_id_mask

 - Specify that the rule applies to the IP protocol ID traffic. 

<0x0-0xff>

 - Enter the IP protocol ID mask here. 

user_define_mask

 - (Optional) Specify that the rule applies to the IP protocol ID and the mask 

options behind the IP header length is 20 bytes. 

<hex 0x0-0xffffffff>

 - Enter the user-defined IP protocol ID mask here. 

packet_content_mask

 - Specify the frame content mask, there are 5 offsets in maximum could 

be configure. Each offset presents 16 bytes, the range of mask of frame is 80 bytes (5 offsets) 
in the first eighty bytes of frame. 

offset_0-15

 - (Optional) Specify that the mask pattern offset of the frame will be between 0 

Summary of Contents for xStack DGS-3120-48PC














































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-48PC

A-Link WNAP4G Quick Installaion Manual preview
WNAP4G
Brand: A-Link Pages: 6
Eaton Power Xpert Meter 2000 Instructions Manual preview
Power Xpert Meter 2000
Brand: Eaton Pages: 16
Eaton POW-R-COMMAND 1000 User Manual preview
POW-R-COMMAND 1000
Brand: Eaton Pages: 84
Patton electronics 4520 Specification Sheet preview
4520
Brand: Patton electronics Pages: 2
Patton electronics 4520 Getting Started Manual preview
4520
Brand: Patton electronics Pages: 86
Hama 39707 Operating Instruction preview
39707
Brand: Hama Pages: 4
Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
Magnadyne RV2458 User Manual preview
RV2458
Brand: Magnadyne Pages: 13
Alacritech 1000x1 Hardware Installation Manual preview
1000x1
Brand: Alacritech Pages: 20
Banner Sure Cross DX70 Instruction Manual preview
Sure Cross DX70
Brand: Banner Pages: 35
Hornington AirStation WHR-G300N Settings preview
AirStation WHR-G300N
Brand: Hornington Pages: 6
S&T kontron COMe-cEL6 User Manual preview
kontron COMe-cEL6
Brand: S&T Pages: 99
STMicroelectronics ST62GP-EMU2 HDS2 Series User Manual preview
ST62GP-EMU2 HDS2 Series
Brand: STMicroelectronics Pages: 58
Abocom PLS342 Specification Sheet preview
PLS342
Brand: Abocom Pages: 2
Jaycar Electronics Duinotech Lilypad Plus XC3920 Quick Start preview
Duinotech Lilypad Plus XC3920
Brand: Jaycar Electronics Pages: 2
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Brand: ACTi Pages: 12
Kontron CP3002-RA User Manual preview
CP3002-RA
Brand: Kontron Pages: 98
TP-Link TL-SL2226P+ User Manual preview
TL-SL2226P+
Brand: TP-Link Pages: 37

Brands by name

Popular brands

Load more brands