manualshive.com logo in svg

D-Link xStack DGS-3120-48PC, Reference Manual

The D-Link xStack DGS-3120-48PC is a powerful network switch offering 48 Ethernet ports and PoE support. To fully understand and maximize its features, it is essential to refer to the Reference Manual. Download the comprehensive manual for free from our website for detailed instructions on optimizing your network setup.

Share
Download
background image

xStack

® 

DGS-3120 Series Managed Switch CLI Reference Guide 

92 

 

chunk 1 will be used. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 1 mask here. 

offset_chunk_2

 - (Optional) Specify the value of the packet bytes to be matched. Offset 

chunk 2 will be used. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 2 mask here. 

offset_chunk_3

 - (Optional) Specify the value of the packet bytes to be matched. Offset 

chunk 3 will be used. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 3 mask here. 

offset_chunk_4

 - (Optional) Specify the value of the packet bytes to be matched. Offset 

chunk 4 will be used. 

<hex 0x0-0xffffffff>

 - Enter the offset chunk 4 mask here. 

ipv6

 - Specify that the rule applies to IPv6 fields. 

(EI Mode Only)

 

class

 - (Optional) Specify the value of the IPv6 class.

 (EI Mode Only)

 

<value 0-255>

 - Enter the IPv6 class value here. This value must be between 0 and 255. 

flowlabel

 - (Optional) Specify the value of the IPv6 flow label.

 (EI Mode Only)

 

<hex 0x0-0xffff>

 - Enter the IPv6 flow label mask used here. 

source_ipv6

 - (Optional) Specify the value of the IPv6 source address.

 (EI Mode Only)

 

<ipv6addr>

 - Enter the source IPv6 address used for this configuration here. 

mask

 - (Optional) Specify an additional mask parameter that can be configured.

 (EI Mode Only)

 

<ipv6mask>

 - Enter the source IPv6 mask here. 

destination_ipv6

 - (Optional) Specify the value of the IPv6 destination address.

 (EI Mode Only)

 

<ipv6addr>

 - Enter the destination IPv6 address used for this configuration here. 

mask

 - (Optional) Specify an additional mask parameter that can be configured.

 (EI Mode Only)

 

<ipv6mask>

 - Enter the destination IPv6 mask here. 

tcp

 - (Optional) Specify to configure the TCP parameters.

 (EI Mode Only)

 

src_port

 - Specify the value of the IPv6 Layer 4 TCP source port. 

<value 0-65535>

 - Enter the TCP source port value here. This value must be between 0 

and 65535. 

mask

 - Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the TCP source port mask value here. 

dst_port

 - (Optional) Specify the value of the IPv6 Layer 4 TCP destination port. 

<value 0-65535>

 - Enter the TCP destination port value here. This value must be between 

0 and 65535. 

mask

 - Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the TCP destination port mask value here. 

udp

 - (Optional) Specify to configure the UDP parameters.

 (EI Mode Only)

 

src_port

 - Specify the value of the IPv6 Layer 4 UDP source port. 

<value 0-65535>

 - Enter the UDP source port value here. This value must be between 0 

and 65535. 

mask

 - Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the UDP source port mask value here. 

dst_port

 - Specify the value of the IPv6 Layer 4 UDP destination port. 

<value 0-65535>

 - Enter the UDP destination port value here. This value must be between 

0 and 65535. 

mask

 - Specify an additional mask parameter that can be configured. 

<hex 0x0-0xffff>

 - Enter the UDP destination port mask value here. 

icmp

 - (Optional) Specify to configure the ICMP parameters used.

 (EI Mode Only)

 

type

 - Specify that the rule applies to the value of ICMP type traffic. 

<value 0-255>

 - Enter the ICMP type traffic value here. This value must be between 0 and 

255. 

code

 - Specify that the rule applies to the value of ICMP code traffic. 

<value 0-255>

 - Enter the ICMP code traffic value here. This value must be between 0 and 

255. 

port

 - Specify the port list used for this configuration. 

<portlist>

 - Enter a list of ports used for the configuration here. 

all

 - Specify that all the ports will be used for this configuration. 

vlan_based

 - Specify that the rule will be VLAN based. 

vlan

 - Specify the VLAN name used for this configuration. 

<vlan_name>

 - Enter the VLAN name used for this configuration here. 

Summary of Contents for xStack DGS-3120-48PC














































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-48PC

Patton electronics 2888 Getting Started Manual preview
2888
Brand: Patton electronics Pages: 51
Qualys GUARD Quick Start Manual preview
GUARD
Brand: Qualys Pages: 2
Amperes iPX5500 Instruction Manual preview
iPX5500
Brand: Amperes Pages: 8
TRENDnet TW-200 Specifications preview
TW-200
Brand: TRENDnet Pages: 2
Dialogic EDP-10 Quick Install Manual preview
EDP-10
Brand: Dialogic Pages: 2
Avaya XM24 Expansion Module Installation Instructions preview
XM24 Expansion Module
Brand: Avaya Pages: 5
XtendLan NVR-xUD User Manual preview
NVR-xUD
Brand: XtendLan Pages: 228
H3C LSWM12H2Q User Manual preview
LSWM12H2Q
Brand: H3C Pages: 9
Moxa Technologies PT-7324 Series User Manual preview
PT-7324 Series
Brand: Moxa Technologies Pages: 36
Tripp Lite N310-30M Specification Sheet preview
N310-30M
Brand: Tripp Lite Pages: 2
Airlinkplus ASW224 User Manual preview
ASW224
Brand: Airlinkplus Pages: 20
Alesis QuadraVerb 2 Setting Up preview
QuadraVerb 2
Brand: Alesis Pages: 11
CyberPower CyberPower RMCARD201 Quick Install Manual preview
CyberPower RMCARD201
Brand: CyberPower Pages: 8
NXP Semiconductors MSC8113 Reference Manual preview
MSC8113
Brand: NXP Semiconductors Pages: 1202
Intel G6950 Documentation Update preview
G6950
Brand: Intel Pages: 51
Paradyne Hotwire 7996 User Manual preview
Hotwire 7996
Brand: Paradyne Pages: 46
Allied Telesis IS230-10GP Web User Manual preview
IS230-10GP
Brand: Allied Telesis Pages: 136
Allied Telesis AT-TN109-A Specifications preview
AT-TN109-A
Brand: Allied Telesis Pages: 2

Brands by name

Popular brands

Load more brands