manualshive.com logo in svg

D-Link xStack DGS-3120-48PC, Reference Manual

The D-Link xStack DGS-3120-48PC is a powerful network switch offering 48 Ethernet ports and PoE support. To fully understand and maximize its features, it is essential to refer to the Reference Manual. Download the comprehensive manual for free from our website for detailed instructions on optimizing your network setup.

Share
Download
background image

xStack

® 

DGS-3120 Series Managed Switch CLI Reference Guide 

172 

 

setting regarding STP is not displayed. The lower level setting will only be displayed when the 
higher level setting is enabled.  

Note:

 This parameter is only for the current configuration. 

modified

 - Show only the commands which are not from the ‘reset’ default setting.  

Note:

This parameter is only for the current configuration. 

current_config

 - Specify the current configuration. 

boot_up

 - Specify the list of the bootup configuration. 

file

 - Specify that the unit can display the specified configuration file. 

<pathname 64>

 - The pathname specifies an absolute pathname on the device file system. If 

pathname is not specified, the boot up configuration is implied. This name can be up to 64 
characters long. 

include

 - (Optional) Include lines that contain the specified filter string. 

exclude

 - (Optional) Exclude lines that contain the specified filter string. 

begin

 - (Optional) The first line that contains the specified filter string will be the first line of the 

output. 

<filter_string 80>

 - A filter string is enclosed by symbol ". Thus, the filter string itself cannot 

contain the “character. The filter string is case sensitive. This value can be up to 80 
characters long. 

<filter_string 80>

 - (Optional) A filter string is enclosed by symbol ". Thus, the filter string 

itself cannot contain the “character. The filter string is case sensitive. This value can be up 
to 80 characters long. 

<filter_string 80>

 - (Optional) A filter string is enclosed by symbol ". Thus, the filter string 

itself cannot contain the “character. The filter string is case sensitive. This value can be 
up to 80 characters long. 

include

 - (Optional) Include lines that contain the specified filter string. 

exclude

 - (Optional) Exclude lines that contain the specified filter string. 

begin

 - (Optional) The first line that contains the specified filter string will be the first line of the 

output. 

<filter_string 80>

 - A filter string is enclosed by symbol ". Thus, the filter string itself cannot 

contain the “character. The filter string is case sensitive. This value can be up to 80 
characters long. 

<filter_string 80>

 - (Optional) A filter string is enclosed by symbol ". Thus, the filter string 

itself cannot contain the “character. The filter string is case sensitive. This value can be up 
to 80 characters long. 

<filter_string 80>

 - (Optional) A filter string is enclosed by symbol ". Thus, the filter string 

itself cannot contain the “character. The filter string is case sensitive. This value can be 
up to 80 characters long. 

include

 - (Optional) Include lines that contain the specified filter string. 

exclude

 - (Optional) Exclude lines that contain the specified filter string. 

begin

 - (Optional) The first line that contains the specified filter string will be the first line of the 

output. 

<filter_string 80>

 - A filter string is enclosed by symbol ". Thus, the filter string itself cannot 

contain the “character. The filter string is case sensitive. This value can be up to 80 
characters long. 

<filter_string 80>

 - (Optional) A filter string is enclosed by symbol ". Thus, the filter string 

itself cannot contain the “character. The filter string is case sensitive. This value can be up 
to 80 characters long. 

<filter_string 80>

 - (Optional) A filter string is enclosed by symbol ". Thus, the filter string 

itself cannot contain the “character. The filter string is case sensitive. This value can be 
up to 80 characters long. 

 

Restrictions 

Only Administrator-level users can issue this command. 

 

Summary of Contents for xStack DGS-3120-48PC














































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-48PC

Samsung SWC-E100 Quick Start Manual preview
SWC-E100
Brand: Samsung Pages: 2
Samsung iDCS 500 Manual preview
iDCS 500
Brand: Samsung Pages: 31
Samsung DDR3 Product Manual preview
DDR3
Brand: Samsung Pages: 15
Netopia 3346-ENT Getting Started Manual preview
3346-ENT
Brand: Netopia Pages: 38
Konica Minolta Network Setup Network Setup Manual preview
Network Setup
Brand: Konica Minolta Pages: 38
Western Digital My Net N750 Start Here Manual preview
My Net N750
Brand: Western Digital Pages: 8
Seriallink SLK-R602 Series Manual preview
SLK-R602 Series
Brand: Seriallink Pages: 29
impinj Speedway Revolution Installation And Operation Manual preview
Speedway Revolution
Brand: impinj Pages: 60
CyberTAN WR214C User Manual preview
WR214C
Brand: CyberTAN Pages: 67
Renesas R0E530650CFJ30 User Manual preview
R0E530650CFJ30
Brand: Renesas Pages: 4
Hauppauge WinTV USB Installation And Reference Manual preview
WinTV USB
Brand: Hauppauge Pages: 55
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Brand: ANTAIRA Pages: 19
Alarm NX-208E Installation Manual preview
NX-208E
Brand: Alarm Pages: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Brand: Genexis Pages: 9
Primera Disc Publisher XR Installation Instructions preview
Disc Publisher XR
Brand: Primera Pages: 2
ADS Technologies API-800 Installation Manual preview
API-800
Brand: ADS Technologies Pages: 21
Draytek Vigor1000B Quick Start Manual preview
Vigor1000B
Brand: Draytek Pages: 17
Net Optics Phantom HD Quick Install Manual preview
Phantom HD
Brand: Net Optics Pages: 2

Brands by name

Popular brands

Load more brands