manualshive.com logo in svg

D-Link xStack DGS-3120-48PC, Reference Manual

The D-Link xStack DGS-3120-48PC is a powerful network switch offering 48 Ethernet ports and PoE support. To fully understand and maximize its features, it is essential to refer to the Reference Manual. Download the comprehensive manual for free from our website for detailed instructions on optimizing your network setup.

Share
Download
background image

xStack

® 

DGS-3120 Series Managed Switch CLI Reference Guide 

414 

 

numerous vendor proprietary variations are responsible for maintaining the topology and 
connectivity of the network. If EAPOL, GVRP, STP (including MSTP), and LACP protocol 
identity is enabled on this port and it is enabled to be advertised, then this protocol identity will 
be advertised. The default state is disabled. 

all

 - Specify that all the vendor proprietary protocols will be advertised. 

eapol

 - (Optional) Specify that the EAPOL protocol will be advertised. 

lacp

 - (Optional) Specify that the LACP protocol will be advertised. 

gvrp

 - (Optional) Specify that the GVRP protocol will be advertised. 

stp

 - (Optional) Specify that the STP protocol will be advertised. 

enable

 - Specify that the protocol identity TLV according to the protocol specified will be 

adverstised. 

disable

 - Specify that the protocol identity TLV according to the protocol specified will not be 

adverstised. 

dot3_tlvs

 - Specify that the IEEE 802.3 specific TLV data type will be configured. 

a

l

l - Specify that all the IEEE 802.3 specific TLV data type will be used. 

mac_phy_configuration_status

 - (Optional) This TLV optional data type indicates that LLDP 

agent should transmit 'MAC/PHY configuration/status TLV'. This type indicates it is 
possible for two ends of an IEEE 802.3 link to be configured with different duplex and/or 
speed settings and still establish some limited network connectivity. More precisely, the 
information includes whether the port supported the auto-negotiation function, whether the 
function is enabled, the auto-negotiated advertised capability, and the operational MAU 
type. The default state is disabled. 

link_aggregation

 - (Optional) This TLV optional data type indicates that LLDP agent should 

transmit 'Link Aggregation TLV'. This type indicates the current link aggregation status of 
IEEE 802.3 MACs. More precisely, the information should include whether the port is 
capable of doing link aggregation, whether the port is aggregated in a aggregated link, and 
the aggregated port ID. The default state is disabled. 

power_via_mdi

 - (Optional) This TLV optional data type indicates that LLDP agent should 

transmit 'Power via MDI TLV'. Three IEEE 802.3 PMD implementations (10BASE-T, 
100BASE-TX, and 1000BASE-T) allow power to be supplied over the link for connected 
non-powered systems. The Power Via MDI TLV allows network management to advertise 
and discover the MDI power support capabilities of the sending IEEE 802.3 LAN station. 
The default state is disabled. 

maximum_frame_size

 - (Optional) This TLV optional data type indicates that LLDP agent 

should transmit 'Maximum-frame-size TLV. The default state is disabled. 

enable

 - Specify that the IEEE 802.3 specific TLV data type selected will be advertised. 

disable

 - Specify that the IEEE 802.3 specific TLV data type selected will be not advertised. 

 

Restrictions 

Only Administrator, Operator and Power-User level users can issue this command. 

 

Example 

To enable SNMP notifications from port 1-5: 

DGS-3120-24TC:admin#  config lldp ports 1:1-1:5 notification enable 

Command: config lldp ports 1:1-1:5 notification enable 

 

Success. 

 

DGS-3120-24TC:admin#  

 

To configure port 1-5 to transmit and receive: 

Summary of Contents for xStack DGS-3120-48PC














































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120-48PC

AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
3Com Token Ring Getting Started Manual preview
Token Ring
Brand: 3Com Pages: 18
Supermicro SC836 X9 User Manual preview
SC836 X9
Brand: Supermicro Pages: 24
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Brand: Supermicro Pages: 27
Gemtek Systems WLTFQR-121 User Manual preview
WLTFQR-121
Brand: Gemtek Systems Pages: 51
Kontron CPS3003-SA User Manual preview
CPS3003-SA
Brand: Kontron Pages: 19
RubyTech VS-820S User Manual preview
VS-820S
Brand: RubyTech Pages: 25
Rainbow QPBB Instruction Manual preview
QPBB
Brand: Rainbow Pages: 2
3Com EtherLink 3C905C-TX User Manual preview
EtherLink 3C905C-TX
Brand: 3Com Pages: 96
Intercoax IXWB-450 Quick Start Manual preview
IXWB-450
Brand: Intercoax Pages: 2
Atmel STK501 Specification Sheet preview
STK501
Brand: Atmel Pages: 2
Active Communications ACS express Quick Start Manual preview
ACS express
Brand: Active Communications Pages: 10
Vecow SPC-2845 User Manual preview
SPC-2845
Brand: Vecow Pages: 61
TP-Link Archer MR600 User Manual preview
Archer MR600
Brand: TP-Link Pages: 113
VIA Technologies Mobile360 M810 Quick Start Manual preview
Mobile360 M810
Brand: VIA Technologies Pages: 25

Brands by name

Popular brands

Load more brands