Software User Manual
D-Link Unified Access System
02/15/2011
Document 34CS3000-SWUM104-D10
Page 195
To create additional graphs, repeat the steps in this section.
Graphing the WLAN Components
The WLAN Visualization tool automatically shows the WLAN components that the switch has discovered.
The panel lists the following component types:
•
Switches (Unified Switch and peer Unified Switches)
•
Managed Access Points
•
RF Scan Access Points
These components appear in the panel on the left until you drag them onto the graph. From the
View
menu, you can choose
to view the components in a list view, which shows all three types of components in the left panel or in a tabbed view, which
shows one type of component at a time, organized by tabs.
Figure 101
shows an example of a list view and a tabbed view
of the same components. Access points are listed by location or MAC address, and switches are listed by IP address.
Figure 101: List View and Tabbed View
Wireless clients do not appear in the panel. Instead, they are automatically graphed based on their association with (or
disassociation from) a D-Link Access Point that is graphed.
Tab View
List View
