D-Link Unified Access System
Software User Manual
02/15/2011
Page 178
Document 34CS3000-SWUM104-D10
Use the buttons at the bottom of the page to perform the following tasks:
•
To access the configuration page for a specific user listed on the page, click the user name.
•
To add a new user and configure the Local User settings, click
Add
.
•
To delete a user from the local database, select the check box next to the user to remove and click
Delete
. Select
multiple check boxes to delete more than one user at a time.
•
Click
Delete All
to remove all configured users from the local database.
•
Click
Refresh
to update the screen with the most current information.
Configuring Users in the Local Database
From the
Local User Configuration
page, you can configure additional settings for an existing CP user in the local
database.
Figure 87: Local User Configuration
Table 70
describes the fields you use to configure CP users in the local database.
Idle Timeout
Shows the number of seconds the user can remain idle before the switch automatically logs
the user out. A value of 0 means that the user will not be logged out automatically.
Note:
Idle timeout is not supported for wired clients.
Table 70: Local User Configuration
Field
Description
User Name
Enter the name of the user. The range is 1-32 characters.
Password
Enter an authentication password for the user. The password length can be from 8 to 64
characters.
User Group
Assign the user to at least one User Group. To assign a user to more than one group, press
the Ctrl key and click each group. The range is 1-32 characters. The default is Default.
New users are assigned to the 1-Default user group by default.
Group ID
Unique group identifier. The range is an unsigned integer. The default is 1.
Table 69: Local User Summary
Field
Description
