Software User Manual
D-Link Unified Access System
02/15/2011
Document 34CS3000-SWUM104-D10
Page 145
•
Click
Refresh
to update the screen with the most current information.
Viewing Detailed Associated Client Status
For each client associated with an AP that the switch manages, you can view detailed status information about the client and
its association with the access point.
Table 47
describes the information available on the
Detail
page for the associated client status.
Bandwidth Limit Down
Shows the maximum rate at which the client receives traffic from
the AP in bits per second. The rate shown in this field is the
configured value rounded down to the nearest 64 kbps. A value of
0 means no bandwidth limiting is in effect in this direction.
Bandwidth Limit Up
Shows the maximum rate at which the client transmits traffic to the
AP in bits per second. The rate shown in this field is the configured
value rounded down to the nearest 64 kbps. A value of 0 means
no bandwidth limiting is in effect in this direction.
Table 47: Detailed Associated Client Status
Field
Description
MAC Address
The Ethernet address of client station. To view details about a different client, select its MAC
address from the menu.
SSID
Indicates the network on which the client is connected.
AP MAC Address
MAC address of the AP to which this client is associated.
BSSID
Indicates the Ethernet MAC address for the managed AP VAP where this client is associated.
Location
Location of the AP to which this client is associated.
Status
Indicates whether or not the client has associated and/or authenticated. The valid values are:
•
Associated - The client is current associated to the managed AP.
•
Authenticated - The client is currently associated and authenticated to the managed AP.
•
Disassociated - The client has disassociated from the managed AP, if the client does not
roam to another managed AP within the client roam timeout, it will be deleted.
Radio
Indicates the radio on which the client is associated.
Channel
Indicates the operating channel for the client association.
VLAN
If client is on a VAP using VLAN data forwarding mode, indicates the current assigned VLAN.
User Name
Indicates the user name of client that have authenticated via 802.1X, clients on networks with
other security modes will not have a user name.
Transmit Data Rate
Indicates the rate at which the client station is currently transmitting data.
Inactive Period
For current association, period of time that the AP has not seen any traffic for the client.
Age
Indicates the time in seconds since the switch has received new association data for this
client.
NetBIOS Name
A unique 16-byte identifier that NetBIOS services use to identify resources on a network.
Tunnel IP Address
This field is blank for all non-tunneled clients. For a tunneled client, this is the assigned tunnel
IP address.
Table 46: Associated Client QoS Status
Field
Description