D-Link NetDefend DFL-260E, Log Reference Manual

Page: 616 / 652

Explanation The Ethernet hardware sender address is a multicast address. The
packet will be rewritten with the hardware sender address of the
forwarding interface.
Gateway Action rewrite
Recommended Action None.
Revision 1
Context Parameters Rule Name
Packet Buffer
2.61.7. enet_hw_sender_multicast (ID: 04400416)
Default Severity WARNING
Log Message Ethernet hardware sender is a multicast address. Dropping.
Explanation The Ethernet hardware sender address is a multicast address. The
packet will be dropped.
Gateway Action drop
Recommended Action Investigate if there are equipment sending packets using a multicast
address as sender MAC address. If there are, try to change the
behaviour of that equipment.
Revision 1
Context Parameters Rule Name
Packet Buffer
2.61.8. relay_stp_frame (ID: 04400417)
Default Severity INFORMATIONAL
Log Message Relaying STP frame from <recvif> to switched interfaces
Explanation An incoming STP frame has been relayed to all switched interfaces in
the same switch route as [recif].
Gateway Action allow
Recommended Action None.
Revision 1
Parameters recvif
2.61.9. dropped_stp_frame (ID: 04400418)
Default Severity INFORMATIONAL
Chapter 2: Log Message Reference
616