<remotegw> on <iface>
Explanation
MPPE is required by the configuration but the MPPE negotiation
failed. Session will be closed.
Gateway Action
None
Recommended Action
Make sure the peer is capable of MPPE encryption, or disable the
MPPE requirement.
Revision
1
Parameters
iface
sessionid
remotegw
2.37.10. l2tp_session_request (ID: 02800010)
Default Severity
Log Message
L2TP session request sent. Tunnel ID: <tunnelid>
Explanation
An L2TP session request has been sent over the specified L2TP
tunnel.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
tunnelid
2.37.11. l2tp_session_up (ID: 02800011)
Default Severity
Log Message
L2TP session up. Tunnel ID: <tunnelid>, Session ID: <sessionid>,
Auth: <auth>, MPPE: <mppe>
Explanation
The L2TP session negotiation has completed successfully.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
tunnelid
sessionid
auth
mppe
2.37.12. l2tp_no_userauth_rule_found (ID: 02800014)
Chapter 2: Log Message Reference
460
Summary of Contents for NetDefend DFL-260E
