Log Message
Application content allowed. Application: <application> Attribute:
<attribute> Value: <value>
Explanation
The identified application attribute and its value is allowed by the
Application Content Control policy.
Gateway Action
None
Recommended Action
Modify the Application Content Control policy if this traffic should
be denied.
Revision
1
Parameters
application
attribute
value
Context Parameters
2.4.10. application_content_denied (ID: 07200017)
Default Severity
Log Message
Application content denied. Application: <application> Attribute:
<attribute> Value: <value>
Explanation
The configured Application Content Control policy does not allow
the identified attribute or its value. The connection is closed.
Gateway Action
close
Recommended Action
Modify the Application Content Control policy if this traffic should
be allowed.
Revision
1
Parameters
application
attribute
value
Context Parameters
2.4.11. out_of_memory (ID: 07200018)
Default Severity
Log Message
Out of memory
Explanation
Failed to allocate memory for Application Content Control.
Gateway Action
None
Recommended Action
Modify the units configuration to make more RAM available.
Revision
1
Context Parameters
Chapter 2: Log Message Reference
187
Summary of Contents for NetDefend DFL-260E
