been reached. NATPool subsystem must replace an active state
since no lingering states exist.
Gateway Action
replace_active
Recommended Action
Increase the MAXSTATES variable for this NATPool if more
concurrent states are wanted.
Revision
1
Parameters
poolname
num_states
replacedip
2.39.10. registerip_failed (ID: 05600011)
Default Severity
Log Message
Request to activate already active Translation IP address <ip> in
pool <poolname>
Explanation
Attempt to activate an already active Translation IP.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
poolname
ip
2.39.11. registerip_failed (ID: 05600012)
Default Severity
Log Message
Too many Translation IP addresses requested for <poolname>
Explanation
To many Translation IP addresses was requested for NAT Pool.
Dropping this address.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
poolname
2.39.12. dynamicip_failed (ID: 05600013)
Default Severity
Log Message
Failed to fetch new Translation IP address from IP Pool <poolname>
Chapter 2: Log Message Reference
472
Summary of Contents for NetDefend DFL-260E
