![background image](http://html1.mh-extra.com/html/d-link/netdefend-dfl-260e/netdefend-dfl-260e_log-reference-manual_3185262094.webp)
Context Parameters
2.1.120. failed_to_send_response_code (ID: 00200255)
Default Severity
Log Message
FTPALG:Failed to send the response code.
Explanation
The FTP ALG could not send the correct response code to the client.
Gateway Action
none
Recommended Action
None.
Revision
1
Context Parameters
2.1.121. illegal_command (ID: 00200267)
Default Severity
Log Message
FTPALG: REST from <peer> not allowed, rejecting command
Explanation
The client tried to issue a "REST" command, which is not valid since
the client is not allowed to do this. The command will be rejected.
Gateway Action
rejecting_command
Recommended Action
If the client should be allowed to do issue "REST" commands, modify
the FTPALG configuration.
Revision
1
Parameters
filename
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.122. https_not_allowed (ID: 00200270)
Default Severity
Log Message
HTTPS protocol is not allowed.
Explanation
Allowed protocols in ALG don't include HTTPS.
Gateway Action
block
Recommended Action
None.
Chapter 2: Log Message Reference
94
Summary of Contents for NetDefend DFL-260E
