Context Parameters
Rule Name
Rule Information
Packet Buffer
2.48.4. rule_match (ID: 06000007)
Default Severity
Log Message
RETURN action trigged
Explanation
A rule with a special RETURN action was trigged by an IP-rule
lookup. This log message only appears if you explicitly requested it
for the rule in question, and it is considered of DEBUG severity.
Gateway Action
RETURN
Recommended Action
None.
Revision
1
Context Parameters
Rule Name
Rule Information
Packet Buffer
2.48.5. block0net (ID: 06000010)
Default Severity
Log Message
Destination address is the 0.* net. Dropping
Explanation
The destination address was the 0.* net, which is not allowed
according to the configuration. The packet is dropped.
Gateway Action
drop
Recommended Action
Investigate why this traffic had the 0.* net as the destination.
Revision
1
Context Parameters
2.48.6. block0net (ID: 06000011)
Default Severity
Log Message
Destination address is the 0.* net. Accepting
Explanation
The destination address was the 0.* net, which is allowed according
to the configuration. The packet is accepted.
Gateway Action
accept
Recommended Action
If this type of traffic should be dropped, modify the "Settings"
Chapter 2: Log Message Reference
533
Summary of Contents for NetDefend DFL-260E
