![background image](http://html1.mh-extra.com/html/d-link/netdefend-dfl-260e/netdefend-dfl-260e_log-reference-manual_3185262194.webp)
Gateway Action
drop
Recommended Action
Verify that no fault network equipment exists.
Revision
1
Context Parameters
2.5.16. arp_response_broadcast_drop (ID: 00300052)
Default Severity
Log Message
ARP response is a broadcast address. Dropping
Explanation
The ARP response has a sender address which is a broadcast
address. Dropping packet.
Gateway Action
drop
Recommended Action
If this is not the desired behaviour, modify the configuration.
Revision
1
Context Parameters
2.5.17. arp_response_multicast_drop (ID: 00300053)
Default Severity
Log Message
ARP response is a multicast address. Dropping
Explanation
The ARP response has a sender address which is a multicast address.
This might be the case if there are load balancing network
equipment in the network. Dropping packet.
Gateway Action
drop
Recommended Action
If this is not the desired behaviour, modify the configuration.
Revision
1
Context Parameters
2.5.18. arp_collides_with_static (ID: 00300054)
Default Severity
Log Message
Known entry is <knowntype> <knownip>=<knownhw>. Dropping
Explanation
The hardware sender address does not match the static entry in the
ARP table. Static ARP changes are not allowed. Dropping packet.
Chapter 2: Log Message Reference
194
Summary of Contents for NetDefend DFL-260E
