Log Message
PPTP server <iface> received a packet routed by a route not set up
by the interface itself. Dropping packet.
Explanation
The PPTP server interface received a packet that was routed to the
interface by a route that was either manually configured or set up by
another subsystem. Traffic can only be sent out on the PPTP server
using the dynamic routes set up by the interface itself.
Gateway Action
drop
Recommended Action
Make sure there are no manually configured routes pointing to the
PPTP server interface in the configuration.
Revision
1
Parameters
iface
2.43.7. mppe_required (ID: 02700007)
Default Severity
Log Message
MPPE failed but is required, closing session <callid> to <remotegw>
on <iface>.
Explanation
MPPE is required by the configuration but the MPPE negotiation
failed. Session will be closed.
Gateway Action
close_session
Recommended Action
Make sure the peer is capable of MPPE encryption, or disable the
MPPE requirement.
Revision
1
Parameters
iface
remotegw
callid
2.43.8. pptp_session_closed (ID: 02700008)
Default Severity
Log Message
PPTP session <callid> to <remotegw> on <iface> closed.
Explanation
A PPTP session has been closed. The specified interface, remote
gateway and call ID identify the specific session.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegw
callid
Chapter 2: Log Message Reference
509
Summary of Contents for NetDefend DFL-260E
