DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
10
Chapter 2
Basic Command List
show session
show serial_port
config serial_port
{baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
login
logout
?
{<Command>}
clear
show command_history
config command_history
<value 1-40>
config greeting_message
{default}
show greeting_message
config command_prompt
[<string 16> | username | default]
config terminal width
[default | <value 80-200>]
show terminal width
config ports
[<portlist> | all] {medium_type [fiber | copper]} {speed [auto | 10_half | 10_full |
100_half | 100_full | 1000_full {[master | slave]}] | flow_control [enable | disable] | learning
[enable | disable ] | state [enable | disable] | mdix [auto | normal | cross] | [description <desc 1-
32> | clear_description]}
show ports
{<portlist>} {[description | err_disabled | details | media_type]}
2-1
show session
Description
This command is used to display a list of users that are currently accessing the CLI interface.
Format
show session
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To display a list of users that is currently accessing the CLI interface:
