DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
829
type
- Specifies what action should be taken if a packet matches the rule's criteria. The
possible values are Permit or Deny.
deny
- Specifies that the action that will take place, if a packet matches the rule's criteria, is
deny.
permit
- Specifies that the action, that will take place, if a packet matches the rule's criteria,
is permit.
match_every
- Specifies to match every packet. Valid values are true or false.
true
- Specifies that every packet is considered to match the selected ACL Rule.
false
- Specifies that it is not mandatory for every packet to match the selected ACL Rule.
srcip
- Specifies the source IP address of the IP ACL rule.
<ipaddr>
- Enter the source IP address, of the IP ACL rule, here.
srcmask
- Specifies the source netmask of the IP ACL rule.
<netmask>
- Enter the source netmask, of the IP ACL rule, here.
dstip
- Specifies the destination IP address of the IP ACL rule.
<ipaddr>
- Enter the destination IP address, of the IP ACL rule, here.
dstmask
- Specifies the source netmask of the IP ACL rule.
<netmask>
- Enter the destination netmask, of the IP ACL rule, here.
src_layer4_port
- Specifies the source Layer 4 port match condition for the IP ACL rule.
domain
- Specifies that the source Layer 4 port match condition will use to port number of
the service called Domain.
echo
- Specifies that the source Layer 4 port match condition will use to port number of the
service called Echo.
ftp
- Specifies that the source Layer 4 port match condition will use to port number of the
service called FTP.
ftpdata
- Specifies that the source Layer 4 port match condition will use to port number of
the service called FTP Data.
http
- Specifies that the source Layer 4 port match condition will use to port number of the
service called HTTP.
smtp
- Specifies that the source Layer 4 port match condition will use to port number of the
service called SMTP.
snmp
- Specifies that the source Layer 4 port match condition will use to port number of
the service called SNMP.
telnet
- Specifies that the source Layer 4 port match condition will use to port number of
the service called TELNET.
tftp
- Specifies that the source Layer 4 port match condition will use to port number of the
service called TFTP.
other
- Specifies to use a custom port number that the source Layer 4 port match condition
will use.
<int 0-65535>
- Enter the custom source Layer 4 port number used here. This value
must be between 0 and 65535.
dst_layer4_port
- Specifies the destination Layer 4 port match condition for the IP ACL rule.
domain
- Specifies that the destination Layer 4 port match condition will use to port
number of the service called Domain.
echo
- Specifies that the destination Layer 4 port match condition will use to port number
of the service called Echo.
ftp
- Specifies that the destination Layer 4 port match condition will use to port number of
the service called FTP.
ftpdata
- Specifies that the destination Layer 4 port match condition will use to port number
of the service called FTP Data.
http
- Specifies that the destination Layer 4 port match condition will use to port number of
the service called HTTP.
smtp
- Specifies that the destination Layer 4 port match condition will use to port number
of the service called SMTP.
snmp
- Specifies that the destination Layer 4 port match condition will use to port number
of the service called SNMP.
telnet
- Specifies that the destination Layer 4 port match condition will use to port number
of the service called TELNET.
tftp
- Specifies that the destination Layer 4 port match condition will use to port number of
the service called TFTP.
other
- Specifies to use a custom port number that the destination Layer 4 port match
