D-Link DWS-1008 CLI Manual
clear snoop map
Removes a snoop filter from an AP radio.
Examples: clear snoop map
filter-name
dap
dap-num
radio {1 | 2}
filter-name
Name of the snoop filter.
dap
dap-num
Number of a Distributed AP to which to snoop filter is mapped.
radio 1
Radio 1 of the AP.
radio 2
Radio 2 of the AP. (This option does not apply to single-radio models.)
Defaults: None.
Access: Enabled.
Examples: The following command removes snoop filter snoop2 from radio 2 on
Distributed AP 3:
DWS-1008#
clear snoop map snoop2 dap 3 radio 2
success: change accepted.
The following command removes all snoop filter mappings from all radios:
DWS-1008#
clear snoop map all
success: change accepted.
See Also:
• set snoop map
• show snoop
• show snoop map
set snoop
Configures a snoop filter.
Syntax: set snoop
filter-name
[
condition-list
] [observer
ip-addr
] [snap-length
num
]
filter-name
Name for the filter. The name can be up to 15 alphanumeric characters,
with no spaces.
Summary of Contents for DWS-1008
Page 1: ......
Page 27: ...D Link DWS 1008 CLI Manual 24 ...
